Numerous options are available for your product to best fit the needs of your particular application, such as:
conductor materials
- 220°C Aluminum conductors are standard where possible
- 200°C and 220°C Copper conductors
taps
- primary and secondary taps
- taps for different frequencies (as in load reactors)
grounds
- Units without a special ground provision can be grounded through the mounting using a star washer unless vibration mounts are used.
-
ground finishes:
- black oxide
- zinc clear dichromate
- solder tin
- anti-oxidant applied
- ground materials:
- steel plain or solder tinned
- copper faced plain or solder tinned
- brass plain or solder tinned
-
ground types:
- female threaded ground pad with english or metric threads
- male threaded stud with english or metric threads
- hole in frame or mounting with or without copper face and/or solder tin
plated terminations
- tin plated copper compression lugs are provided as standard for low current applications
- bare copper or aluminum bus bars are standard for high current applications
- copper bus bars can be solder tinned or nickel plated
- aluminum bus bars can be electro-tin plated
shields
- single, double or triple foil shielding between windings
terminations
- as standard, terminations exit from coils - customers should connect with secured leads
- conductors can be routed and secured to terminal panels or terminal blocks
- individual leads can be secured to electrical standoffs
water resistance
- units can be double coated for increased water resistance as for use in 3R enclosures
vibration pads
- vibration pads and vibration mounts are available
installed devices
- cooling fans
- thermal switches and thermal sensors
- mounted CT's
design options
- see our Engineering page for general design options